Subscribe to RSS feed
Spalted Maple and Walnut Tool Cabinet
4 commentsI built this tool cabinet for my hand tools, so it seemed appropriate to maximize my use of hand tools. The drawer and frame dovetails are all cut with saw and chisel, and all surfaces are finished...
view details
Stepped Tool Cabinet
1 commentThis tool and storage cabinet was a concept that originally started with a base cabinet of drawers then slowly evolved into a cabinet on a cabinet. The door on the lower cabinet and internal drawers...
view details
_sqm.JPG)
Seaton Chest
2 commentsThis is a close copy of the seaton chest made of white pine and mahogany veneer with a finish of blue milk paint and shellac.
view details
7 drawer roller chest in black with black walnut accent
1 commentDesign was born of the need to house wood working jigs and accompanying bits, measuring devices. Made from poplar and sealed, grain filled, sprayed and cleared to appear smooth to the eye. All...
view details
Wall mounted hand tool cabinet
1 commentHere is a tool cabinet I designed using AutoCad/Solid Edge and built back in August of 2008. It's made from Oak Plywood trimmed with Cherry. The carcasss has mitered corners which in turn have walnut...
view details
Nut-Wood Hanging Tool Cabinet
This hanging tool cabinet was built from butternut with walnut drawer fronts. The marquetry was knife-cut using a variety of veneer scraps and set in a birchveneered...
view details
Air Tool & Sharpening Tool Box
This tool cabinet holds my entire collection of air tools and sharpening tools. The top drawer contains Tormek jigs and stones. The right drawers hold brads & pins, air...
view details
Finish Carpenter's Dream Bench/Cabinet
3 commentsMiter saw stand with fold up sides made of pine & finished with Varathane. Swivel casters for moving, tools are stored in 2 tool boxes that get attached to the fold up side wings, the tool boxes...
view details
Rolling Piano Tool Chest
5 commentsA pre-existing Cable Piano case adapted with Maple Veneer sheet goods and solid Mahogany drawer fronts to become the best rolling tool chest I could have ever imagined.
view details
Hanging Hand Tool Cabinet
2 commentsAll joinery and wood cut by hand tools, cobbled together from ideas of other's cabinets. Carcass joinery are hand cut thru dovetails, the drawers are half blind dovetails.
view details
Hanging Tool Cabinet
1 commentMade of reclaimed and re sawn pine. Box joints at corners, tongue and groove front and back. Hanging on French cleats. Finished with Shellac and wax
view details
cabinetmaker's tool chest
4 commentsMy cabinetmaker's tool chest is intended to be a showplace to store and show off the antique tools I collect. Therefore, I added several embellishments. The exterior is solid walnut with a large...
view details
Machinist Tool Chest
2 commentsMy tool chest is made of blue stained sugar pine. The booked-matched top with Greene and Greene breadboard ends is key locked. A removable front panel has a tongue on its bottom which fits into a...
view details
Tool chest with oak tree inlay
1 commentMy hand tools should have a nice place to live and what better than a might oak tree to watch over them. I wanted to experiment with Lyptus wood so I came up with this tool cabinet to try it out on...
view details
Tool Cabinet
3 commentsA Greene & Greene inspired tool cabinet, built while I was a first semester student in the Introduction to Woodworking class at Red Rocks Community College in the Fine Woodworking...
view details
Cabinet Makers Tool Chest
1 commentPatterned after turn of the century English and American cabinet makers tool chests. This one is made of 1" heart pine. It's 38" wide x 24" deep x 22" high. There is a sliding...
view details
Tool Cabinet
2 commentsGot tired of looking for the small stuff. This wall hung cabinet is 44" wide x 46" tall x 11" deep. Made out of quarter sawn cherry and spalted maple. The inlaid butterflies are...
view details
Tool Cabinet
Plane Jane chest on chest tool cabinet. Made out of quarter sawn cherry with hand cut dovetails thruout the chest and drawers. Both chests are 5 ft long x 19 1/2" deep x 40" tall for the...
view details
_sqm.jpg)
Ed's Toolbox-in-progress
Project started with top box, recently added base. Includes sharpening station behind false drawer front.
view details
Double Tool Cabinet
5 commentsMade from walnut, birch, and Baltic birch, the cabinet has two sets of dovetailed, piano- hinged doors, one on top of the other, for more storage space. Tools can be mounted on all seven...
view details
Lonnie Bird Inspired Toolchest
10 commentsThis is a cabinet was inspired from a feature article and video clip in FWW about a secretary that Lonnie Bird built. This furniture style doesn't match the rest of my house, so I decided to make it...
view details
Ace of Purplehearts Workbench
8 commentsScandinavian style workbench. European beech with purpleheart accents. Hand turned brass pins support the bow saw and carpenters mallet. Project for Red Rocks Fine Woodworking...
view details
Congratulations to our winner!
Congratulations to Gregg Novosad of Palatine, Ill. He wins a Professional Cabinet Tablesaw from SawStop for his Lonnie Bird inspired tool chest.
