The Gallery

showing 33 - 64 of 72 posts matching bench [X]
< Previous 1 2 3 Next >

Sort By:

Shaker Stool

pcjohnd, member | March 30th, 2009

This simple stool is great for little ones climbing to the sink, and for adults reaching high cabinets. It's 12"Hx12"Wx18"L. I modeled this stool on one that we bought years ago in a Shaker furniture...

view details

Coat Rack Dog Retreat

jetwood, member | March 29th, 20091 comment

The Retreat is 6' tall X 3' wide X 18" deep You can sit on the bench and put your shoes on You can lift the lid up on the bench top and look down in the dog house And rover has his own door to...

view details

Hard Maple Tradtional Workbench

adeptr, member | March 26th, 2009

This bench was made from Hard Maple and is very heavy upon it's completion. I always wanted a heavy, quality made bench for my shop and waited until I could afford the cost of better materials...

view details

Shaker Cat Window Seat

Nyarlanotep, member | March 25th, 20091 comment

This hand dovetailed step was made for my cats to look out at the world. As you can see that can be quite exhausting. The sides are pine and the steps themselves are natural...

view details

Shaker step, bench and kitchen

petervandorp, member | March 25th, 2009

Van Dorp Meubelmakerij (Woodshop) in the Netherlands is specialized in making Shaker furniture on demand and is reseller of Shaker Woodshop

view details

Crystal Bridges walnut bench

DougStowe, member | March 24th, 20094 comments

Crystal Bridges is a new museum of American art being built in Bentonville, Arkansas, and the wood for this project came from the site during ground preparation. The previous owner of the site was...

view details

Hickory Entry Benches

pittman34, member | March 13th, 20093 comments

I am an admirer of the late George Nakashima and this is the first piece that I have made using butterfly joints. Since I own my own woodlot, I have been air drying native Vermont lumber for years...

view details

Workbench

woodgear, member | March 1st, 20093 comments

I have a small wood shop in the basement and this what the firs time I made dovetail drawers. This bench is made of maple and the top has a 8/4 cherry skirt and wood vise. all the drawers are...

view details

Mitten Box, Bench

chezzetcook1, member | February 25th, 2009

Great bench for storing your mittens, hats and scarf's, also great for sitting on to tie up your boots. Pine construction with cedar lining to keep your mittens smelling great. constructed for...

view details

New Bench

Kent Perdue, contributor | February 14th, 20091 comment

I recently finished this, it is a bench that seats two. Materials: Elm, Red oak, MDF, Bronze, Steel, Rubber. I joined the edges of the boards, and left the faces ruff sawnnbsp...

view details

sculputured bench

arthouse2, member | February 13th, 2009

Man and woman sculptured bench. I designed this piece for a Art gallery bench

view details

Carving Table

swetter, member | February 10th, 20092 comments

The carving table is made from maple, cherry, and walnut. It is made to be collapsable because the weight of the top makes it difficult to move yet it is very stable. It was designed to be...

view details

Greene and Greene Style Hall Bench

donjohn, member | February 5th, 2009

Cherry and curly oak Hall Bench in the style of Greene and Greene. Ebony pegs, cloud lift rails, simple chisel carving accents.

view details

ASH BENCH

The Bohemian, member | February 5th, 20093 comments

ASH BENCH : MILLED AND AIR DRIED FROM LOCAL PARK THROUGH DOVETAILS AND WALNUT BUTTERFLIES

view details

Peace Bench

Don_Snyder, member | February 4th, 2009

Mahogany. Height 16, Length 30, Width 8 inches.

view details

My work bench

Machinist2, member | February 3rd, 2009

This bench is 33" X 96" all oak. I was tired of having things on top of my bench (another tool box) taking up space, so I made the bench with an underneath machinist tool box.

view details

Fir Bench, Canadian Eh!

just wanted to know, member | January 30th, 20093 comments

This is my first attempt at mortise and tenon joinery. Needless to say I learned a lot. Fir is an interesting(read challenging material). It is widely available here in Edmonton...

view details

Entrance Bench

donkondra1, member | January 25th, 2009

Cherry with a oil & lacquer finish. Brown leather seat. The arm to leg joint is a through double wedged tenon.

view details

bench

TF79, member | January 22nd, 2009

Couldn't find a bench for our dining room table. So just made this one cheap.

view details

Bench in Black Walnut

CurtThorne, member | January 18th, 2009

Bench, with arching ends formed using coopering techniques.

view details

Handmade Bench

ac445ab, member | January 16th, 20095 comments

Top main board is beech, while the dark wood is mahogany. Legs are walnut stained silver fir and panels are douglas. The legs have wedged mortice and tenon joinery. No power tools have been usedMy...

view details

WoodWorking Bench

JulieLewis, member | January 15th, 20093 comments

I'm entering my husband in this competition as a surprise. He'd kill me if he saw the last photo of him lying on the bench! (Supposed to be like those bikini clad women who sell cars!). I'm not a...

view details

Freestanding Wall Units

Derffred, member | December 29th, 2008

The vestibule of this condo opens into a larger central area, which provides access to a music room, a living room, and a hallway to the bedrooms. With lots of empty space in the vestibule and...

view details

ball and claw bench

marcor, member | December 26th, 2008

Made out of Mahogany, my own dimensions inspired by a stool of Randall O'Donnell's. The upholstery was done by my wife.

view details

Bonzai Bench

qcwood, member | December 26th, 2008

Bonzai Bench for a very serious Bonzai enthusiast, made of cypress, ss fasteners, waterproof adhesives

view details

twins double highchair

dovetaildreams, member | December 12th, 20083 comments

This is a solid maple highchair that I built for my twin boys. The design is my own, although it is loosely based on a dining chair that I saw. I turned or carved or shaped every single...

view details

"for lovers only rocking bench"

Geoffofbefferlyhills, member | December 10th, 2008

"For my brother" made of white birch,mortis and tenon wedge construction,2 oil paintings (copied from 2 swedish paintings done in the 1640 ,24k gold guilded arrow head and other parts .5' length

view details

classy rustic and willow garden bench ensemble

johntosoff, member | December 10th, 2008

I build many styles and versions of these tables and benches as well as chairs, bedroom sets,livingroom sets,kitchen sets and other log and willow furniture and generally give them to family and...

view details

Elk Antler Bench

Valdezgolfman, member | December 10th, 2008

Elk Antler Bench utilizing animal hides and natural elk antler sheds

view details

Arbutus & Walnut Arrow Bench

PW2008, member | November 7th, 2008

This bench is made primarily from Arbutus wood with Walnut highlights in the spines of the arrows/feathers. It has a varathane finish. The seat is shaped.

view details

Fantail Bench

MDCustom, member | November 5th, 2008

This was an interesting project in the restoration of a yacht from 1930. Slight modifications were made from the original blueprint. All exposed parts are made entirely from teak. The...

view details

Various projects

applekor, member | November 5th, 20082 comments

These are just afew of my pieces I have designed and built over the past year. I enjoy mixing the wood, fabrics, leathers and glass to create a custom piece.

view details

showing 33 - 64 of 72 posts
< Previous 1 2 3 Next >

Welcome to Fine Woodworking's new Gallery, our community where woodworkers like you can share photos of all your projects. Log in or register now to create your public profile, upload an avatar, share photos of all the projects you've built, and comment on other photos.

Step One: Create Your Profile or Login

Step Two: Post a Project

Step Three: View Your Page