The Gallery
Post your project Subscribe to RSS feed
Ace of Purplehearts Workbench
8 commentsScandinavian style workbench. European beech with purpleheart accents. Hand turned brass pins support the bow saw and carpenters mallet. Project for Red Rocks Fine Woodworking...
view details
Paint Shelves
1 commentThe house next door was being demolished, and I salvaged the subfloor to make this shelving unit for storing paint in our basement. Because these boards had also been used for the foundations...
view details
chest of drawers
This Dresser is made of 100 year old Walnut boards salvaged from a stone hauling trailer. The top is Butternut with a Walnut breadboard. There is a hand scraped Walnut cock-bead around...
view details
chest on stand
2 commentsThis cabinet was made from Cherry, milled by the recipient’s deceased grandfather, with spalted, curly Maple veneered sides and doors, made from wood salvaged from a pallet. The doors...
view details
A Side Table
A Side Table is made from solid black walnut and claro walnut scraps collected from a local woodshop. The inlays are osage orange veneer offcuts. Dimensions are 25 3/16" x 14 1/2" x...
view details
Reclaimed Fir Dining Table and Buffet
2 commentsAs a fulltime furniture maker I rarely find time to build something for us. It was nice to take something that would be in a dump by now and turn it into something that can be past on for generations.
view details
Closet Shelves and Brackets
These brackets and shelves were made from recycled pine. Our 1906 house had a simple Jelly Cabinet in the basement that was rotting at the base and falling apart. I salvaged what I could...
view details
Live Edge Headboard
I alway wanted to do a live edge piece. This is maple burl,cherry posts,ash rail and top. Padauk was used for the hand shaped pins
view details
soft maple stool
These stools are made from soft maple with through mortise and tenons with a hard maple wedge. these are a first attempt at any kind of furniture making for me. I have two of them because the legs...
view details
Bubinga & Maple Credenza
5 commentsThis is from my wine cabinet series. This piece though made for the show of The Furniture Society Conference held at Victoria, BC., Canada, Frame is bubinga, door panels are maple...
view details
Mission coffee table
1 commentMission-style coffee table: a combination of two plans that I found and re-sized to meet my needs. All but 5 BF of new QSWO that I used for this project was from reclaimed lumber.
view details
Ipe and Mahogany Side Table
2 commentsThis is a table I made of Ipe and Mahogany scraps that were being thrown out on a jobsite I was working at. The top ,legs, and shelf are mahogany. The bottom stringers are Ipe. The lower shelf...
view details
Window Table inspired by Mission Gong Stand.
2 commentsMade from old white oak barn boards. No electricity used to make it except for the light bulbs. Brace, chisels, hand planes, hand saws, scrapers, hide glue, walnut stain from black walnuts...
view details
Kitchen cart
I built this American chestnut kitchen cart from lumber which I sawed and milled from logs found in a 100+ year old log barn on my daughter's property. The knife/utensil holder consists of a...
view details
arts and crafts night stand
1 commentI designed and built this nightstand for my wife with reclaimed antique wormy chestnut from a barn built in 1900 in North Carolina.
view details
hall table
1 commentThis oak hall table was made from an old drop leaf table that my neighbor threw in his trash pile.
view details
Shaker oval boxes and other furniture
Everything made is of Shaker inspired design. I have made many Shaker pieces over the years. Oval boxes are made of various domestic and exotic woods.
view details
Shaker Style Bookcase
When I first sketched this book case, it had a classic Shaker form although it is not precisely like any Shaker item I have ever seen. The clean lines, nice proportions, and small...
view details
Recycled Wood Coffee Table
Coffee table made from a fir post and fir flooring salvaged from an old Victorian home in Eureka, California. Stripes are from an old piece of redwood and a leftover scrap of bloodwood from another...
view details
skinny legs and all
5 commentsI designed and built this small side table over the past winter, it's main body is Ash. A log that my wife and I literally stumbled over a few years back on the shore of Cape Breton Island in Nova Scotia, Canada. I had a freind with a bandsaw mill rip it down and left it to air dry for three years. The drawer fronts are made from Angelique, again another 'sea-faring' wood species...This was reclaimed from an old barge that sat in Marthas Vineyard for the better part of 100 years! This table was completely made by hand using only hand tools. The finish is Tried and True oil/varnish mix. Reclaimed wood, no power tools used and a food grade all natural oil for finish...what could be any greener than that? Cheers! www.tomfidgen.blogspot.com
view details
Bow Arm Outdoor Lounge Chair
6 commentsReclaimed , vertical grain , Port Orford Cedar . Pegged , mortise & tenon construction . Sunbrella fabric , stainless steel hardware .
view details
Family Room Bookcase
This is my first big project, it's made of pine with a frame panel style. The joints for the frames are tenons and for the panels are tongue and groove.
view details
Blanket Chest
2 commentsBlanket Chest: Q/S White Oak, Aromatic Cedar. Tudor Brown Bri-Wax, Butchers Amber Wax Finish.
view details
Shaker Night Stands
Shaker Nights Stands: Poplar and Cherry with Hard Maple Knob. Milk Paint and Shellac Finish.
view details
Cherry & Rosewood Entertainment Console
3 commentsHi Everybody, This was going to be a simple entertainment console. Initially, bottom shelf was going to have ventilation slots, but later on I thought I can do better than that. Doors were...
view details
Mahogany Hall or Sofa table
5 commentsMade entirely of reclaimed mahogany dining table leaves this table is 39"L x13"W x 31"H. It has a hand rubbed water based poly finish. I designed and crafted this table specifically for my daughters...
view details
Heirloom Bassinet
Here is a Bassinet I designed and built for my daughter. I took inspiration from Jim Schmidt's cradle featured in the October 2008 FW readers gallery. It is constructed of Mississippi Swamp Ash...
view details
Ronja's Mirror
I made this mirror for my daughter's first christmas last year. The letters for her name were made by her grandfather and are glued to the frame with superglue in the hope that one day she can take...
view details
Entertainment Cabinet
Entertainment cabinet made with maple. Front doors slide to the side for access to electronics. Drawers can house up to 450 CD's and 200 DVD's. Finished with aniline dye and...
view details
cherry shaker hall table
This shaker hall table is made of cherry. The legs are tapered. A bead of wenge runs along the bottom of the skirts. The drawer is cut directly from the skirt across it's full...
view details
Black Walnut Bar by Ken Kraay
1 commentThis was a commission for a client in Mesa, Arizona. Built in Indiana, and shipped to clients residence in Mesa , Arizona. All glass was hand painted, and etched. Mirrors were 1"...
view details
Welcome to Fine Woodworking's new Gallery, our community where woodworkers like you can share photos of all your projects. Log in or register now to create your public profile, upload an avatar, share photos of all the projects you've built, and comment on other photos.
Step One: Create Your Profile or Login
Step Two: Post a Project
Step Three: View Your Page
Join Woodworkers Like You
62857 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
_sqs.jpg)
Create your profile now!
