The Gallery
Post your project Subscribe to RSS feed
_sqm.JPG)
Grandfather Clock Wedding Gift
8 commentsAs a wedding gift we decided to make a grandfather clock for our son and his bride. We worked on it for about 6 months (off and on) and as a result we gave it to them late (a few months). We kept it...
view details
The New Front Porch...
4 commentsI know this isn't furniture but I built this stuff like it is furniture. There are mortises and tenons, splined mitres, biscuit joinery, segmented curves, bolections, reised panels and the use...
view details
Chess Set, Table, & Chairs
9 commentsFirst by making the chess set pieces. Then to add every piece into the actual table and chairs. 1. The top has parquetry around the outer border showing the castle move, were the Rooks protect the...
view details
Behind Closed Doors
2 commentsThis is a cabinet that was inspired by Krenov with my own twists and turns. This box has a lot of different woodworking. There is marquetry, turning, carving, and different types of...
view details
Tiger Maple Rolling pin -
2 commentsThis rolling pin was made from tiger maple 3 " in diameter by 21" long. It was dyed with Trans Tint medium brown #6004. Dye was diluted in denatured alcohol and tested on scrap for the right...
view details
Blast Gate Improvement
5 commentsIf you use these anoying Plastic gates that do not want to close. Check this out. I cut the corner and faced it down and it clears itself out............
view details
Coffee pot
2 commentsTurned and carved from figured maple. Form copied from 18th century silver piece.
view details
12 Woods Segmented Bowl
A bowl made for a friend. Made of small pieces left over from other projects.
view details
17 Woods Bowl
This bowl was constructed of 17 different woods. All of the materials were leftovers from other projects.
view details
Carved Vessel
3 commentsTurned and carved vessel of figured maple from a large dead tree in my yard. Completely hand carved and sanded. About 10" tall. Finished in 15 coats of lacquer and buffed to a glass finish
view details
Sweetgum Plate
A plate I turned from siding I saved when a old 96 year old barn was being torn down.
view details
Lamplight turned inside out
This project was made of four 4x4x50 inches Itaúba blanks, glued together, and than turned in two places and in the edge that will become the internal hole where I passed the wiring. After...
view details
String of Pearls
Turned from recycled wooden barn siding.Turned on my Jet 1236 lathe. Lacquer finish.
view details
Plant Stand
This was made using Purpleheart and Hard Maple. It is approximately 30 inches tall. There is an inside outside turning and a segmented style glue up in the column. It is finished with multiple coats...
view details
Catalpa Hollow Form
This piece is made from Northern Catalpa wood. It is approximately 5" tall and 6" in diameter. I used Ellsworth style hollowing tools to hollow the inside. The finish is several coats of...
view details
Custom Turned duck and goose calls
These are some of my custom turned duck and goose calls
view details
Silver Maple Vessel
Silver Maple crotch wood salvaged from a tree cutting service. Approximately 8 1/4" tall. I turned this from a green log and then allowed it to slowly dry in a plastic bag. The...
view details
_sqm.JPG)
Maple Bowl Vase
This is turned from a Silver Maple that I planted from a seed in 1958. I had to remove the tree before it would fall, & destroy my house.
view details
Rings of things
This is part of a series called rings of things. The bowl is maple, the ring is beech, and there are several different species in the marquetry.
view details
Roman Style Sword Handle
My son-in-law asked me to make a handle for an old blued short sword a friend had made for him. I fitted the tang to block of maple burl I had (it was worth it as he invites me over for dinner...
view details
Padauk platter
1 commentThe padauk platter is approximately 16" in diameter. Texturing detail was added and the platter is finished with oil and wax.
view details
Forms and Small Turned Box
I turned this small collection of forms and a box with lid from some chunks of redwood burl left over from bigger bowl projects
view details
Make Waves
This cherry and steel wall sculpture is 5' by 9'. Three slabs were cut from one log. Each slab was cut into smaller pieces. The pieces were turned off center creating concentric...
view details
Pyramid supported vessel
2 commentsThis piece, with a terrible title, has a bit of an Art Deco feel to it, as well as a sort of faux-Aztec vibe. Or maybe "The Day the Earth Stood Still". It's made of rosewood (I think), tiger stripe...
view details
Welcome to Fine Woodworking's new Gallery, our community where woodworkers like you can share photos of all your projects. Log in or register now to create your public profile, upload an avatar, share photos of all the projects you've built, and comment on other photos.
Step One: Create Your Profile or Login
Step Two: Post a Project
Step Three: View Your Page
Join Woodworkers Like You
56662 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
