Login | Create an Account Site Upgrade Notice
Subscribe to Fine Woodworking Magazine
Back to List

Cherry Entertainment Center for 65" DLP

August 5th, 2009 in The Gallery     
Jim_S Jim_S, member
thumbs up no recommendations
Note back 6 of the side opens to allow access to cords.  Top section of side can be removed to access rear of components.
Space for LAN style computer in the center section.  The back of the top section stops about 3 inches from the shelf to allow cords to pass through.
Note back 6 of the side opens to allow access to cords.  Top section of side can be removed to access rear of components.

Note back 6" of the side opens to allow access to cords.  Top section of side can be removed to access rear of components.
Add CommentAdd Comment
PrintPrint

Cherry entertainment center.  4 drawers are big enough to hold DVDs.  Top extends 7"past the back of the cabinet.  Sides have a 6" panel on the back which open to allow access to cords, power supplies, and general connections.  I chose to use 1/2" cherry plywood top instead of solid to keep weight down and provide a very flat surface.  Drawers hold >60 DVDs each


Design or Plan used: My own design
posted in: The Gallery, table, cabinet, cherry, entertainment center, big screen
Add CommentAdd Comment PrintPrint

Comments (5)

Jim_S writes: Once I had it designed, it took me about 2 weeks to build. I could have built a second in about 1/2 the time. Cost was pretty reasonable. I used 1 sheet of 1/2" cherry plywood and 1 sheet of 1/4" plywood for the backs. All the drawer fronts and vertical pieces were shorts which the local mill sells for 50% off so they were pretty cheap. I would say I had <$200 in wood and another %50 in drawer slides and handles. Posted: 11:37 pm on October 12th
NWHandiwerks writes: I am planning a very similar one out of Cherry as well, but using door/shelves instead of drawers. How much time/$ did this take? Posted: 9:17 pm on August 19th
NWHandiwerks writes: I am planning a very similar one out of Cherry as well, but using door/shelves instead of drawers. How much time/$ did this take? Posted: 9:16 pm on August 19th
NWHandiwerks writes: I am planning a very similar one out of Cherry as well, but using door/shelves instead of drawers. How much time/$ did this take? Posted: 9:16 pm on August 19th
NWHandiwerks writes: I am planning a very similar one out of Cherry as well, but using door/shelves instead of drawers. How much time/$ did this take? Posted: 9:16 pm on August 19th
You must be logged in to post comments. Click here to login.