Ryan's Blanket Chest
September 14th, 2009 in blogsHere's an overview of a blanket chest project that recently passed through my shop.
This is a drawing of the blanket chest.

Carol Bass designed it for clients of ours who have the live edge trestle table that can be seen in my portfolio on my website. This was an early drawing and the feet ended up being turned from one blank. The box will be stained a blue-green and the curly maple feet will remain their natural color.
I recently discovered that Bessey makes adjustable clamping pads that slip onto their K-Body Revo clamps. They pulled this chest together without any slippage.

They tilt from 0-15 degrees and saved me from having to make a couple sets of angled cauls.
I had to make 2 small cauls to focus pressure at the ends of the lid divider.

With everything glued and cleaned-up, I can rout for the hinges and attach the lid. This shot shows the wedged, through tenon for one foot. The frame and panel bottom goes in later.

I did a little splicing, attached the eye straps and now it's off to my friend Carl for stain and a lacquer finish.

The finish is a coat of blue stain, then a coat of green, then a couple coats of crystal lacquer.

This color corresponds to the color of 2 lamps in the room that this chest will call home.
-Turner is the author of an upcoming book on blanket chests.
posted in: blogs
ABOUT THE WOODWORKING LIFE
Get to know the woodworkers who make Fine Woodworking's online community the liveliest woodworking forum on the Web.
Each week, The Woodworking Life will feature the best projects, topical discussions, and how-to tips direct from the community.
WE WANT YOU! Find out how you can become a contributor to The Woodworking Life.
Looking for our archive?











Comments (0)
You must be logged in to post comments. Click here to login.